FlexiClamp clamping bolt system
Build your own clamping system
New, incredibly fast and individual application: FlexiClamp. Build your own FlexiClamp clamping system only with the parts you need for your application.
Advantages of clamping bolts:
Quick setting that's what characterizes our clamping bolts:move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: here is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.
Which bolt size do you need?
- The FlexiClamp bolts are available in heights of 50 mm and 80 mm.
Standard screw or bearing clamping screw?
- Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
- Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head..
Other position necessary?
- With the transvers T-slot bar, you can reach any position on the machine table - completely independent of the machine table grooves.
Quick setting that's what characterizes our clamping bolts:move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: here is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.
The FlexiClamp bolts are a modern combination of an aluminum body and hardened steel surfaces. The bolts are available in heights of 50 and 80 mm.The bolts are positioned and fastened using a centric screw with a hexagonal wrench while the bolt is stationary - without any undesired twisting..
You only buy what you need - decide for yourself::
Which bolt size do you need?
- The FlexiClamp bolts are available in heights of 50 mm and 80 mm.
Standard screw or bearing clamping screw?
- Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
- Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head..
Which clamping height should it be??
- Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.
- Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.
Other position necessary?
- With the transvers T-slot bar, you can reach any position on the machine table - completely independent of the machine table grooves.
Sales
Support
Service
PDF-Download
Catalogue FlexiClamp
Manual FlexiClamp
